Recent content by florin f

Jee..., I am so tired I typed so bad! Sorry guys, hope you understand the meanings.

Hi guys, MAttbeals is right: with the rigth settings you can have different hotfolred , each one addressing a specific Imaging unit ( so computed callibration curves, ICC, etc) so that we can have a consistent output. SO thanks Lukas you are right we dont loose the focus on this. It is...

Thanks Mattbeals. I looked on their page and seems that they indeed have a product called TASK FORCE that it is a true workflow. Thanks a lot. IN the case you describe it looks like you have 3 RIPs not one while here the customer require one RIp to manage all. Florin

OR brush pressure not corectly adjusted. Florin

Sorry, dust in the CTp is out of the question in case you get spots. It is only valid if you get missing spots! Caus the plate is negative in behaviour. So again: check the brush and the roller in the dveloping machine. You might find they are dirty. florin

Hi, of course they are not in the same place as this is randomly generated by the mentioned causes. Dust in the CTP? Yes, this might be also an option. But I assumed you clean it every 3 -4 days, right? Moreover some CTPțs have a blow air system right before the laser beam. Check if this is...

then it might be the temp sensor then it might be the temp sensor OK, I will look for the service manual to see if it is then not the heater sensor indicator. When it is blinking there these 2 options: either the temp or the fill up volume are not met. Check with a thermometer if the heaters...

Hi, I have some customers running one or two CTP's, imagesetters at once. They would like to get a simple and reliable workflow solution (preflight, imposition, trapping, ripping, ticket, etc) that can help them run both machines in the same way.\What is the best workflow solution independent...

If I remeber well and I am not wrong: looks like the sensor for dev or fix is borken. Didn't you notice that the fill up pump is never stopping? SO the machine is working but you waste a lot of solution. florin

I guess you spent a lot of money on it. The reason you are all confused is that this is not designed for printing industry (despite their effort) but for any industry. like you would create a printing press that can be converted for the textile industry.... The problem with the Navision is the...

HI, this is not a procesless plate, right? On the n91v this was caused by: - filter type ( you hae to get the metallic one) - water temperature- when washing the coating the water has to be over 19 Celsius degree. IF less then the coating is not washed away - bad pressure of the rollers...

one of the best application for stock control one of the best application for stock control Hi guys, depending on what budget you have for a stock control application you might find some that could fit your requirements and some that can crash all the time (assuming the database is growing...