Recent content by Kernie

Did you find a solution yet? We run an Arizona 660 flatbed with UV. Are you running something similar?

Hopefully someone out there has a simple remedy to this issue. We can't see to nail it down. We have 2 exact iMacs running MAC OS 10.6.7 with your typical prepress apps/tools installed. Both use Truflow client 5.0 (Trueflow SE Rite Ver5.00 TF016). One of the stations started to get the...

I had a feeling it couldn't be turned off, and yes, it is a bit obnoxious! Do you know if that panel pops off, or is it screwed down? I didn't see screws around it, but didn't want to try and force it in case they here hidden. Thanks for the feedback I'll look into those options and hopefully...

We recently moved into a smaller shop where were are in close proximity to our CSR's. For the most part we're not much of a bother to them, until a plate ejects from our Dart 4300 E plate imager. We got rid of our chem processor and switched to the Ecomaxx plate so it ejects the plate back out...

I may order a few of these (found doing an image search) at $1.75 each. If I do I'll let you know how they work. Scoring Wheel | University Products[]=1262&navTree[]=1264&navTree[]=2044

Good point...

I was wondering if anyone has suggestions or knows of any hand type tools or smaller inexpensive hand-press type tool used for scoring very small quantity or proof mock-ups (digital toner based). We have the burnishing tools etc but those tend to rub off image and usually don't go over well...

We've had the C900 for about 8 months now. Downtime due to maintenance or service calls has been fairly minimal. Service has been great as well.

That is a good question, but why is it a $64,000 question? :p The honest answer is because we are stuck in our ways. I would have to really dig for a reason I think. Something to consider...

Hello Hello My name is Jeff, I'm from Rogers, MN. I've been in the printing biz for about 14 years or so. Mostly been with smaller shops and spent a year with a big trade show custom display company with an in-house large format graphic dept. Most of my experience is in electronic prepress...