Recent content by Ozkan Hangisi

Hi Gregg, If the wet proof and printing press have different ink sequences, the colors will not match. The ink sequence shall be KCMY to match standard characterization data sets such as Fogra 39,47,51,52... You are correct if all the process parameters are in tolerance with the same paper...

Dear Khalidye, I saw your post from last summer related to CtP. My company sells secondhand Heidelberg CtPs. I have a 2012 Heidelberg SuprasetterA106 in my stock with Autoloader and Thermal Processor. The machine is in very good condition, and can be tested. If you are still interested in buying...

I just saw this bad news and it made me feel very sad. Rest in peace Matt.

Hi Steve, I did not understand how a Heidelberg staff suggested this solution. The start point parameter of the laser head(s) which is located right side of the line, should be increased 1 step. Heidelberg service can do this with remote connection.

Hi Mellowyellow. If a curve is applied to exposed plate how it would be possible not to apply for color control bar? Is there a function in your RIP for that ? To compare actual dot gain values on color bar with target, curve must be applied. The workflows such as Prinect and Prinergy have...

I couldn't read all the entries but Fogra53 looks pretty good approach. In my country half of print customers are not aware of color management and all of their Adobe applications have default USWebCoatedSWOP CMYK profile on color settings (They have no idea what a profile is and why it must be...

Check the guide plate (switch blade) between load table and drum. It might not come to exact load position.

Suprasetter arrives the customer without limitations for plate setup. Focus, laser power and drum speed adjustments are very easy. But it is also possible to arrange a password for plate setup by Heidelberg local service or the customer. Without password, related parameters can't be changed for...

It may happen after optic head replacement. You need to ask Heidelberg CtP Support for upgrade reference key from 2up to 8up again. This is known problem.

Adjust side guides of the optic carriage. They come closer and prevent laser beam to reach film.

Hybrid screening is suitable when high resolution is needed with negative plates, especially photopolymer type.

Erik If I understood right you are asking Color Picker window of Photoshop Open a new CMYK document, assign your process profile, open color picker window, pick the color from library then you will see Lab, CMYK and RGB values of the color. For more accurate numbers assign a fresh custom...

All depends the customer and job characteristic. When you have a customer with tight tolerances and colors with original products to compare, then default profile will fail. Even default profile is good for magazines, brochures etc... what is the reason to keep monitor with default profile for...

I would measure same sheet several times to check whether the measured values are always same. If not, clean glass and spectrolino lens. Also check rail is clean and oiled well. Movement along the sheet must be smoth. I assume you care about job change from high coverage to low coverage. If a...

Hello File > Preferences > Names