Recent content by Soluzione

Hi francois... Man Roland 105 does not run. 24V control led indicator is on. 24V power supply is fine. Run button isn`t working, however, 24vdc is present. Can you help me?

Default Error 14 Prosetter 74 my Heidelberg Prosetter 74 displays ERROR 14: This is the User information: An error occurred in the mirror motor unit... THE RECORDER HARDWARE IS DEFECTIVE This is the Technical Information: TRHE TIME MONITOR REPORTS TIMEOUT DURING THE SPIN-UP PHASE OF THE MIRROR...

my Heidelberg Prosetter 74 displays ERROR 14: This is the User information: An error occurred in the mirror motor unit... THE RECORDER HARDWARE IS DEFECTIVE This is the Technical Information: TRHE TIME MONITOR REPORTS TIMEOUT DURING THE SPIN-UP PHASE OF THE MIRROR MOTOR.... CHECK THE MIRROR...

I have a Man Roland 100 press. The PERFECTOR system was activated alone and I can not disable it. and I followed all the steps in the manual but not disabled. The message on the display is 21 19. If someone has the book with a description of the error codes. Thamks in advance...

Hi Tejonaso. I have a Prosetter 74 working on 100%. Contact me at [email protected] if you need help to install. I install a Delta Print Manager Rip and Metashooter to manage print queues and Prosetter User Interface Software as Prosetter control panel. Regards.

PANTHER PRO/46 HS Sending a letter-sized image, but get a smaller negative. The normal size of the letter is 8.5x11 inches, however, the result is a negative 8.5x10.7 inches, the distortion is in the direction of film advance. I suspect the cause is a defect in the pull of the film. Could be...

Hi Prepressing. I have trouble with a PANTHER PRO/46 HS imagesetter. Sending a letter-sized image, but get a smaller negative. The normal size of the letter is 8.5x11 inches, however, the result is a negative 8.5x10.7 inches, the distortion is in the direction of film advance. I suspect the...

When I try to createa new Virtual Printer in Metashooter Print Manager displays this: Error: 500 Location: /printservice/jsp/Detail2VirtualPrinterEdit.jsp Internal Servlet Error: javax.servlet.ServletException at...

I try install a Heidelberg Prosetter 64 CTP. An intermitent beep appears a few time after Prosetter is turned ON and CTP never goes to ONLINE status. Any help will be welcome. Thanks in advance.

Try printing to file Try printing to file I had a similar trouble. type Command+P to open print dialog box, select imagesetter (panther Por 62, agfa accuset, Screen rt 2035 or anyother), then on PDF option change to any Poscript option. Change other parameters. If you have a Panther Pro or...