Search results

thanks guys, I cleaned the vacuum suction system out, cleaned the storage drum, cleaned the pincerbar gripper pads but didn't run any sheets yet(didn't have time). I'll keep you posted. Thanks for everyone input! Bill

I have a 4 color heidelberg 102 speedmaster perfector and recently when perfecting I am getting movement on my backup marks on the gear side of the sheet only when I run the press above 7k per hour. The operator's side holds rock solid no matter what speed I run. I have replaced all of the...

I had posted this on the general forum by accident and now realized that I should have post this on the heidelberg forum. Can anyone tell me the procedure to remove and install a "refined impression cylinder jacket" on a 102 40" heidelberg perfector? also can you tell me where I can get the...

Thanks for your input Ret Heidelberg Instructor. I think that we're gona let heidelberg do the job, but I am very tempted to give it a try myself. I have done some extremely extensive repairs on heidelbergs over the years. Just curiuos, do you know where I could buy the "Presser Bar" tool to do...

happy holidays everyone! Can anyone tell me the procedure to remove and install a refined impression cylinder jacket on a 102 40" heidelberg perfector? also can you tell me where I can get the presser bar installing tool? is it worth buying the jacket from an after market company or from...

happy holidays everyone! Can anyone tell me the procedure to remove and install a refined impression cylinder jacket on a 102 40" heidelberg perfector? also can you tell me where I can get the presser bar installing tool? is it worth buying the jacket from an after market company or from...

Thanks for all the information everyone. I just had an instructor in today from heidelberg and he showed me in the caracteristic curves how to make a copy of the existing standard heidelberg curves (which are not alterable) and then you can change the curves anyway that you need in the copied...

Is there a simple way of a setting @ the consol of touch screen cp2000 to reduce all incomming ink profiles by a pecentage of your choice from prep? Right now, all of our incoming ink setting from prep I have to manually cut each color profile 30% before starting the job or the ink will be to...

Frank, the plate seems not to be to wet and I am not emolsifying on the rollers either running the metering speeds at 75% and up. This is why I was thinking it could be the fountain solution? does that make sence to you? I will try your suggestion of changing press speeds tomorrow. Rapid3, It...

I agree with kbarz, I am an offset 1st pressman of 31 years. I just love it when I hear press companies tout that "this press is so easy to run that a cave man can do it". Believe me, if you hire someone to run your press that used to be a landscaper last week, you will be sorry and you will be...

Hi, alex Sorry, Eariler I posted what had happened to one of our older presses (93')with the light bulb not realizing your press is an 05'. (as odd as it sounded, the bulb shorted out and did stop the press, it took heidelberg tec. about a week to track it down. however, i agree this is not the...

Erik, No I haven't tried the plates, however, we don't have this problem on any other press. and we all us the same plates. thanks, bill

thankyou for everyones input, Yes it is happening in both units and it does it up both op. and gear side edges of the sheets. I doesn't matter what size sheet we run, 40", 38", 35", it will show up both edges soon after running. Again, I can overcome most of it by raising the water extremley...

frank, thanks for your input. I'll check out the web sites. you are right,the heidelberg perf device only perfs around the cylinder and from what i have read in the manual, you remove the drum cylinder at the last unit impression and then you install these wheels that have perfs on them. It also...

while running my 4 color heidelberg perfector(black over black in units 2-3) i am getting a haze or scum on each edge of the sheets on both sides of sheets. I have repeatedly resett the rollers on both units and replaced both metering rollers but still have the same problem. it seems o.k. when I...

I am open to both aspects, I was looking through the press manual and found that heidelberg has a perfing devise that fits onto the last unit of my 4 color perfector. this would allow me to print all 4 units and perf in line. the other alternative I loose 1 unit. just trying to weigh out what...

you are right, 1/2 turn is recomended, but I have found that if there is any low spots in my metering roller and I open a 1/4 turn it can cause flooding in that area of the low spot. So I close 1 turn and run my metering speeds slightly higher(due to tighter setting) and this gives me latitude...

i'm looking for a load turner for paper, anybody have any sugestions on what type or manufacturerer is better? what to stay away from? i'm also looking for a perf attachment for my 4color heidelberg perfector. anyone have any info on using the per attachment?

Bill Rothwell Bill Rothwell Hi Jeff, Here is how i set the pan roller in my heidelbergs. First I cut the water setting quit a bit in the consol on all units. Then I start the roller turning and slowly adjust setting on the gear side of the press until the flood is gone and then I do the same...

1st pressman Bill Rothwell 1st pressman Bill Rothwell The circled T means a dynamic error has happen. Dynamic errors only happen during the time a press is actually running. check the dynamic test in your cptronic. Is the press slamming to a stop or is it slowing down to a stop? I have had the...