Search results

Folks, I'm trying to switch to using PDF/JDF out of Total Flow Prep instead of using Postscript. Going well except a couple of issues with tabs: - With A4 tabs if I select "Apply settings to PDF and remove from job ticket" the tab then prints totally blank - not just the tab ear but the body...

If I print them from the bypass tray the printer wants reverse collate. From tray 2 or 3 it's forward collate. Beyond this I don't see how it makes any real difference though

So I asked the engineer and he said you can't remove the staple cartridge from the holder until all the staples have been used.

Not really - the staples in the X are enclosed on all sides except the back

So my printer has been warning about low staples for a while so I thought I'd proactively sort it before I'm on leave. I ordered a replacement staple holder and staples, but I also ordered a box full of just the staples to refill the empty holder to use next time. Problem is, I can't for the...

Thanks! I'm aiming to get something cheaper than that, at least the main unit should be under 1k but the accessories etc if required could be more than that.

Iirc it was a first iteration of a new machine which was plagued with problems. Users and Konica couldn't get them out of service fast enough. With regards to registration, yes, in principle you would expect a production printer to be capable of more accurate registration (once calibrated)...

Folks, I'm looking for a machine (as compact as possible) to punch cover stock for wire binding. So, I need: - 2:1 and 3:1 punching (rectangular) - A4 and A5 support (incl. ability to suspend pins not used on A5) - Adjustability to make the punches line up with inner sheets which are punched...

The part on the page where they explain how it's used specifically for golf ball printing and has a jig for it

So this looks like a classic example of "problem files" when printing legal documents, which I touched upon in my thread here: https://printplanet.com/threads/suggestions-on-preflight-for-problem-documents-legal-repro.293387/ I will give embedding missing fonts a try next time. Usually I opt...

Clearly you didn't bother to read the description properly.

Acrobat Pro

Thank you - that's pretty much what I do when a file won't cooperate. I'm just wondering if I can use preflight to avoid files crapping out on me mid print, but without converting everything to image up front. Also - I once had a document that nothing would work on.. In the end using the...

Thanks for your response. I'm not always entirely clear on what the problem is as the files just crap out on me half way through printing and I get a vague error message from CWS. Almost always though the files have one or more of the issues above. Re OCR - I believe the issue is when OCR has...

I'd be grateful for any recommendations on use of preflight to help with this scenario: Most of our work is legal reprographics. Printing binders with tabs full of documents from external lawyers. Often CWS will stop printing halfway through a job because it found an error in the document...

When I looked at Xerox the dealer told me the prime link was not really a production level machine. I have two Ricoh c5310s, with GBC punch units as well. We also print and punch tab sheets. On the whole they’re good machines for our usage. It would be worth taking a look at them id suggest

Is it jamming on other stocks of similar weight?

Thanks

Is that just face trim or can it also be specced for side trimming as well? Do you know off hand how many sheets it can centre staple and at what weight?

Yeah this was a very dark blue!