Search results

How was that still running. Any time mine has done that it's stopped running in no time.

Yep. Send it the blank job. My salesman tells me it's costs a click but in my experience it doesn't

To be honest I have never paid attention to which sheet is off, but thinking about it, the top sheet is always 'fine' and then the other sheets are off to varying degrees and wandering all over the place. Luckily the alignment isn't that critical so I just live with it but it would be nice for...

Yep, tech was in moaning about the amount of clicks and the amount of ncr I was doing and he cleaned it all then.

It's the react digital as well that we use from antalis. I also use the giroform recollated stuff and don't seem to have that problem. We are up in the North west

I have been doing what seems like an ungodly amount of ncr in the recent weeks and on my 80, the image seems to be all over the place. Top to bottom is fine but it seems to wander side to side quite a bit.

Is the 2btr different to the v80 2nd btr. I currently have 5 brand new on site due to the rate we are changing them. Everytime I have an engineer visit which is about once or twice a month he brings another in and orders a spare for me. Get friendly with your engineer and buy him coffee and...

Cheers for the replies. I looked into getting it serviced etc but bringing back to 100% spec is going to cost a lot of money and at the end of the day it's still a very old machine. Regarding business card cutting, we just can't get the cutter set up any which way to do them as it just can't...

Hi. Does anyone have any experience of the above machine? I currently have an aging DC-615 that is starting to show its age and its annoying that it doesnt cut down to business card size. I am not a brand snob any means but I cant say I have heard of matrix other than prehaps laminators. Are...

It doesn't matter what you write. The customer will always assume its your fault because they didn't spot the error. We have even introduced deliberate errors into some customers artwork to see if they spot it and 9 times out of ten they don't. I will say that the vast majority of my...

This. All I want is a ball park, even if they said it ranges from x to xxxxx then at least I would know if I could even look at it.

I do this more than I would like to admit to. I never give them to the customer but depending on the customer we keep them on the shelf if they are evergreen. Things like church magazines just get skipped. For some reason I have the most problems when printing books and I really need to catch...

Hi. We have just noticed an odd problem with our duplo. When we are slitting narrow items (55mm) 3 across an srA3sheet the centre run is too narrow by about 5mm. I know the correct answer is to get it serviced and adjusted but is there any adjustments we can make to try and make it better...

Thanks everyone, I will have a play about and give it a try. I just split them and printed them this time as my customer needed them asap but I do these semi regularly so if there is a way of speeding up the process I will take it,

Hi all. I have a 2500 page doc that I need to print double sided and fold every 2 printed pages. I know I can split the pdf into 4 pages and print but I am wondering if I can do this in fiery without splitting the document. I have a versant 80 with external fiery. Cheers Chris.

Hi. I have a 2 knife trimmer that is missing the wiring harness that connects to the 4 pin lead from the trimmer (and connects to the square fold). Does anybody happen to know the part number for this lead OR can anybody supply this harness for me Or can anybody take some high resolution...

This! I did a job last year where I was plagued by static holding the sheets together and dragging double feeds through. It got so bad I had to stand and separate out each page of the book and restack the pile. Thankfully it was only 50 books or so but it was annoying!

If your booklet is a 16 page booklet that is 4 a4 pages so I create a 4page BLANK document and print it to the hold queue on the fiery. Once in the fiery I then tell it which tray my "blanks" are coming from and set the fold and staple options. - it might not be the best way or the easiest way...

What we do, is just create a blank pdf with the number of flat pages in the booklet and send it to the queue on cws. And it just prints it. Have u tried that

We print 2 up on sra3 and trim out and then back through either the bypass tray or the impose tray to fold and staple. Face trim on either the square fold or the guillotine. We have a versant 80 and I have checked and it doesn't charge us for blank clicks.