Search results

https://kluge.biz/blog/mark-andy-acquires-brandtjen-kluge-inc/ just saw this. threw up a little.

i am pretty sure that has a dc variable speed motor. look for two covers on the motor, 1 on either side. there will be carbon brushes under the covers. pick up at grainger or an electronics store. usually an easy fix

i have used thermotype equipment, business card slitters and thermographers, for over 20 years. i toured the plant back in the 90s. support has always been awesome they will talk you through trouble shooting on the phone if something is amiss. Everything I have ever bought was well built.

Natty what ever you come up with Must be simple for the customer to use. A couple mouse clicks and typing minimal info.

i have a customer that comes in and hands me his phone to get files off of.

we used a challenge for years got good results if you didnt rush. but nothing compares to diecutting...

i think that press is all mechanical. take off the cover on the chain delivery operator side and see if anything has come apart.

and 35 cents to get in the movie. what do get for 2 bits now?

a good machine shop should be able to take your blade and extrapolate a wider blade from it.

any error messages? polars are usually pretty good at diagnosing themselves. on our 78 there is a latch that would catch the blade in a catastrophic failure. this has to be lifted by a solenoid to a sensor before the blade comes down. we broke a bracket once and the solenoid operated but the...

thanks for all the theoretical discussion

does anyone have trouble using both installs of creative cloud that adobe allows at the same time? Like 2 people logged on the same account working in the same room on 2 different pc's.

there is a tube with small holes down the middle of the delivery that should blow a little air on the sheet. the knob to control this is on the nonop side of the delivery. experiment with covering holes at different places to see what gets your curl to lay down

" Where on the press can I do this if so?" push in the silver knob to the right of the handwheel and turn the handwheel slowly untill you find the locking bolt. loosen the bolt use the handwheel to raise or lower the image and retighten the bolt. dont run the press with the bolt loose or try to...

the bar that moves the side lay runs thru both blocks you may need to clean and oil where the bar that moves goes thru the block that isnt supposed to

correct me if i am mistaken but isnt this press just a renamed ryobi 3302? if so there is a push guide on the feed board that should jog the sheet to the springs to register it before being sent to the infeed roller. if that guide is just loose there could be several problems. can you post a pic?

i have seen this on the DI. Being waterless you only have tack, roller pressure and roller quality to work with. glaze on the rollers is the usual culprit with worn rollers coming in close second.

run on synthetic and laminate.

We had a good year. Sales were up from the previous year. We added some equipment and a few new products. Looking forward to a positive 2018.

i have this tech manuel, i attached just the cover pm me and i will send it if its what you need