Search results

The bits I have done so far, have been great. Also it's our first time having an external Fiery with Impose, which has helped out massively for doing layups, especially with things like numbering. Instead of me having to do it all in InDesign. Have you ever done any speciality stocks, like clear...

That's interesting that you get this on your Heidelberg digital printer. I wonder what is causing it though? because I can understand getting scratches on the sides of the roller from the paper edge. But to get them in the middle and a large indent mark, I can't get my head around that...

Thanks TJ, thats interesting that you have done that many clicks and yours is in good shape. Like I say our brand new machine only came in January this year. Maybe the roller could of been manufactured like this and the marking is now only showing. Anyway I sent the photos to the Xerox engineer...

Thanks TJ, from reading your comment about you saying that you haven't got any finisher on your V80, like you said that made me wonder its something on the engine itself. Well I sat and had a good look inside it this morning and I think I have found it. Next to the 2nd BTR there is a thin cover...

The engineer came back out today with the parts. So he changed the fuser, then the 2nd btr and the IPT belt. Looking at that it did have a lot of scratch lines which looked similar. But now we have changed all 3 parts, we are still getting the odd few marks. So he's took away a few samples and...

I get these lines on both single and double sided. I'm thinking it could be the plastic deflectors too. I tried increasing and decreasing the fuser temperature and still the same.

So I was printing some business cards on 350gsm Silk and I stopped the job when I noticed I was getting thin scratch lines all over the sheet. I called an engineer out and he was adamant that it was the rollers in the booklet maker finisher section. So he cleaned the rollers and still got...

Yes I have created a custom profile for that paper stock and job. No I haven't tried changing the stock weight setting for that. But I did try a 250gsm silk and it did it on that as well. Yes the top is different compared to the bottom, I presumed it was because of me changing the transfer...

No I don't have a spare fuser, as its a brand new machine which we only got in January.

So I have just been running a 2 part NCR job, and the first 15 sheets were fine, then all of a sudden both artwork positioning keeps moving. Seems the artwork on the yellow you see the tick marks are closer to the edge of the paper compared to the white sheet. Then another sheet it will be the...

So I was printing a booklet on Friday and I noticed that the logo from the back page was appearing faintly on the front cover and getting some banding issues. See photo below. Has anyone else had this issue? I did ring for an engineer today and he said its to do with the image transfer...

I shall give them recommendations a go. Thanks

I thought that may be the case. I just use tray 1 for A4 paper and tray 2 for my labels and tray 3 sits empty. When it comes to 2 part or 3 part, I’m using trays 5,6,7. On the rare occasion I get 4 part, I just run the bottom sheet on its own and then re-run it through again as a slip sheet...

It was originally long grain in SRA2 called Horizon and then I cut it in half to SRA3. I have ordered some digital Coral SRA3 so I can see if there is an improvement.

We have purchased a brand Versant 280 and I noticed that trays 1-3 printed in a different position compared to 5,6 & 7. I was testing out a NCR 4 part and found the bottom sheet from tray 1 was off compared to trays 5,6 & 7. Is there a way to get all trays to the same alignment ? I have noticed...

We have recently purchased a brand new Versant 280, here in the UK. On a job today I noticed that despite setting up a profile for the SRA3 uncoated 350gsm stock for alignment from tray 6, I could see that the artwork was shifting up and down and not staying in the same position. Now I did...