• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Search results

  1. VladCanada

    avantra 30 error 64

    Yes, it's possible. But you have to re-program it with proper software using AvDiag/Unidiag
  2. VladCanada

    avantra 30 error 64

    It''s a Flapper jam. Look inside the drum to see any mechanical problems first.
  3. VladCanada

    Internal SCSI hard disk of RIP Star 400

    There is no chance to restore any content of RIP HD without special commands, sent over AGFASet program. It does not matter what type of SW is inside HD - anyway that was neither PC nor MAC base, AGFA RIP Sta 400-600 internal SW was based on the Assembler language for very specific Controller...
  4. VladCanada

    DPM34sc Strange plates

    Any sort of troubles could appear after a few days on the run. I do not think your issue is fatal and incurable. I wish I could see problem zone with my X20 microscope. Is your exposure part of machine CAPSTAN style?
  5. VladCanada

    DPM34sc Strange plates

    Plate developed properly but incorrect exposed. Laser problem or combination of a few ones, including media motion. You need serviceman on site for deeper look inside.
  6. VladCanada

    Avantra 30 short OLP - Error 61

    You will come back with the same question soon because that was not home sensor problem.
  7. VladCanada

    Phoenix 2250 OLP problem

    Anywhere... Nobody can tell you where without visiting your site to have a glance on the machine.
  8. VladCanada

    Phoenix 2250 OLP problem

    Cold welded contact
  9. VladCanada

    AGFA SELECTSET 7000 ERROR 35

    error 35 - Image Buffer address as data test failure.
  10. VladCanada

    Help me please! Heidelbergsignasetter 931 error mirrormotor & xycontrol connections

    It's not encoder problem, forget about spin-motor. You can not replace encoder itself - it needs to be balanced. That's laser switching/transition problem. Check electronics board. I am not Heidelberg trained serviceman, so please don't ask me for help.
  11. VladCanada

    Agfa Accuset 800 Plus User Manual

    Not available anymore since site has been switched to new forum engine Will send you later
  12. VladCanada

    Tech Support

    And how technicians will survive in such a cruel world? :)
  13. VladCanada

    dotmate 7500 help

    Had never seen that diagram. It's third part production module purchased by Scanwiev
  14. VladCanada

    Avantra 25 Weird OCP flash error

    The OCP module, which contains a dedicated micro-controller, is the main controller of the system. NOT JUST DISPLAY WITH TOUCHPAD!!! User commands originating from the RIP and/or the operator are verified, parsed and either acted upon by the OCP or passed to the DEC. So... Brain and spinal chord...
  15. VladCanada

    Avantra 25 Weird OCP flash error

    Oh,,, that reminds me kids plaied with sick puppy and complained later - Mum, he is dead... OCP and DEC are in strong logical conjunction to each other. Killing one you could kill another one. The correct way was to purchase another OCP and stop playing dangerous game as you did.
  16. VladCanada

    AGFA Avantra Film-Processor Control-Panel BUTTON FAILURES (Repeating Part Failures)

    Usually problem comes from the blue plug of keyboard. Silver conductive lines are open very close to the plug and corroded with developer evaporation. Exposed lines have dark color, under the mylar layer they are still silver metallic. Do not forget to protect exposed silver with... nail polish...
  17. VladCanada

    Agfa CTP Galileo VXT

    As usual, Farshad... Neither feedback, nor thanks for our time and experience.
  18. VladCanada

    Agfa CTP Galileo VXT

    U9 Blue Sensor is your Cassette presence sensor. This sensor has a potentiometer to adjust its sensitivity.
  19. VladCanada

    Agfa CTP Galileo VXT

    I have tried to keep that machine in a good shape :D
  20. VladCanada

    Agfa CTP Galileo VXT

    Wow, I did not know that. The crate price was so high, so KTWeb boss just stopped any attempt to sell their VS.

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

 
Back
Top