• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Search results

  1. VladCanada

    Agfa CTP Galileo VXT

    Or KOREAN TIMES :)
  2. VladCanada

    Agfa CTP Galileo VXT

    Yes, that's the best they can do, Farshad! It looks like the sensor works exactly at the edge of its sensitivity and needs more sensitivity to be adjusted.
  3. VladCanada

    Agfa CTP Galileo VXT

    Do you have a message " PM Plate Data base does not agree with Console Plate Data"?
  4. VladCanada

    Agfa CTP Galileo VXT

    Remove the panel and electronics box cover at the PlateManager (opposite side to cassette loading area) to see LEDs grid on the electronics PCB. Check the Opics reflective Sensor of PlateManager located at the side opposite to Pizza door/loading area. Sensor have to read reflective Cat's Eye...
  5. VladCanada

    Accuset 800 requirements

    Hi Melp, Please give me your e-mail address and I'll send you some info about Viper 3.02. The possibility to connect the Accuset to "newer" Mac depends on the availability of PCI slot at Mac's mother board 'cause you have to reinstall PAC brd from the "old" Mac. ...And the presence of ADB port...
  6. VladCanada

    AGFA Accuset 1500 compatible with Windows?

    Farshad, It works fine. SW RIPs Viper and Taipan have the same user-friendly interface and use the same PAC/UPAC pcb in the latest versions. Apogee RIP uses the same software core as Taipan version 3.1... the first PDF RIP.
  7. VladCanada

    AGFA Accuset 1500 compatible with Windows?

    You can use VIPER RIP with Windows... but the question point is: Are you able to create "full-fledged" AppleTalk protocol environment in the conjuction Mac based RIP <--> FronEnd PC. Not sure it's possible with Workstation Win versions, but OK for Windows Server ones. Otherwise you need some SW...
  8. VladCanada

    AGFA Accuset 1500 compatible with Windows?

    It depends on type of RIP you use... Star? Viper?
  9. VladCanada

    AGFA film equivalent

    AGFA and Kodak films are manufactured by the same third party company. The difference is the package and labels.
  10. VladCanada

    RipMate for Mistubishi DPX Help

    Unfortunately you need a right dongle for a right RIP. RIPMate SW will ask you for the password, which is actually hidden in the dongle. :( All other mixtures will not work!
  11. VladCanada

    Heidelberg Prosetter74 making hair lines in halftone screens and solids

    Yes, it is NOT a mechanical problem caused by some imaging carriage movement. In that case I expect some hairlines to be regular but along/across the whole plate. In your examples just only some part of image is involved. It looks like a data stack transmission has some interruptions at the end...
  12. VladCanada

    Heidelberg Prosetter74 making hair lines in halftone screens and solids

    It's unclear what direction of these hairlines: Fast Scan or Slow Scan.
  13. VladCanada

    Avantra 44 takeup motor problem

    1. Cover/Door Open signal will stop boot-up procedure before spin-motor will start and carriage will move to self-check encoder signals. Laser safety - FIRST! Verdict - declined. 2. Analog and Digital carriage encoders - both are very good sealeded to prevent any dust penetration. Encoder wheel...
  14. VladCanada

    Firmware OCP-module (Avantra44/Galileo VS) EEPROM

    Check your Skype, Sergei. EEPRON contains: Micro-controller 1. OCP User Parameters 2. Cassette Parameters 3. Operational Statistics Read chapter 2 at Avantra Service Manual to understand the Functional Analysys
  15. VladCanada

    Dotmate 7500 Repair

    That's a processor time issue, DotMate is waiting for "ready" signal. Do not remember excact name of that parameter, but user have an ability to change that time value. Did not touch that model for 15 years :(
  16. VladCanada

    Difference between cassette or daylightload?

    Correctly Daylight load means the roll of film has a few feet of black paper/plastic on the top to load the film into cassette. Cassette - to load the film in the dark or safe light (green for red laser diode)
  17. VladCanada

    Agfa N94-VCF

    Toronto, "Korea Times". 3 years in use. CTP: Advantage NSL, Luxel, Galileo VS. Plate processors - AGFA VPP68 and VCF65 upgraded to wash-out condition (some round brushes removed and new guides installed). Customer is satisfied with plates, but plate processing is their main concern because of...
  18. VladCanada

    Galileo Handler

    No. I don't have it.
  19. VladCanada

    Agfa Compose PCI Card for Avantra Driver Missing :(

    That's a driver for Compose Express RIP PCI board with APIS output, I guess. Question number two: what's the version of Express RIP you use? systecopy you are registered at printroot, so try use that source because it's illegal here to share wares of legal SW. Or ask Compose to obtain the...
  20. VladCanada

    How I can replace agfa lithostar lp82 with normal PC?

    RIP Interface: The interface to the RIP is a standard SCSI interface, built into the engine. The SCSI cable must be ordered separately from the engine. Only the 10 ft. SCSI cable can be used with the standard SCSI interface. If the 65 ft. cable is required, the optional differential SCSI...

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

 
Back
Top