Firmware OCP-module (Avantra44/Galileo VS) EEPROM

[drinkings]

Hello all!

I'm actually searching for firmware OCP-module.
Not a flashrom! I need a part of firmware which I can burn to chip with programmer.

OCP-module doesn't answering to COM-port.

Sorry for bad arguements. I hope you'll understand my poor English.

 

[VladCanada]

Check your Skype, Sergei.
EEPRON contains:
Micro-controller
1. OCP User Parameters
2. Cassette Parameters
3. Operational Statistics
Read chapter 2 at Avantra Service Manual to understand the Functional Analysys

 

[drinkings]

Volodya,
I know it, but my poor English not allow me explain my problem very well.
I think there are two parts of firmware that OCP-module contain...
One part is

Micro-controller
1. OCP User Parameters
2. Cassette Parameters
3. Operational Statistics

And second is like BIOS that operate all of them
Unidiag divides them as FLASHROM and FIRMWARE
In my case unidiag wrote that both had version like 0.00
I have nothing on OCP-module board.
I can't load FLASHROM cause my OCP-module's COM port doesn't work.
And I need the FIRMWARE to solve this.

...thank you and please translate this to good English for others...

 

[Armya Inc]

Volodya,
I know it, but my poor English not allow me explain my problem very well.
I think there are two parts of firmware that OCP-module contain...
One part is
And second is like BIOS that operate all of them
Unidiag divides them as FLASHROM and FIRMWARE
In my case unidiag wrote that both had version like 0.00
I have nothing on OCP-module board.
I can't load FLASHROM cause my OCP-module's COM port doesn't work.
And I need the FIRMWARE to solve this.

...thank you and please translate this to good English for others...

Your English is O.K. We all get it.
Have you ever downloaded the firmware ? It sometimes works and sometimes doesn't.
The best is to get a OCP pcb module and upload the firmware from this and download to the old one. In case if the old one after downloading the firmware fails, the new one can be replaced and you will have an operational firmware to download on other OCPs.
I have one for Galileo Vs and Agfa Avantra 44. It is fully functional.
Make me an offer, I will send it to you. Email me: [email protected]