Search results

Here’s my nickels worth- GCR affects all tri-chromatic colors (Y-M-C). The ‘graying’ component of a color is reduced and replaced with black. I.e. “reds” graying component is Cyan. Blues graying component is Mag. GCR - “pushes” the tone scale to be more saturated or less saturated in the...

Attached is the User Guide for Ladder Bars that will truly show press problems. Call with any questions 412.889.7643 or [email protected]

Printing 50/49/40 is impossible! These values are at or near the midtone area - where the midtone dot gain changes under the best conditions (+/- 2%} is the standard deviation of a good press! So as long as these gains climb together- you get a ‘darker’ grey - when one goes up or down relative...

“If you imaged plates from linear film and printed using ISO conforming ink hues to the specified densities then you would automatically achieve grey balance. Great” No such luck! The dot gains make grey balance (at density). The proofs were Matchprint SWOP. At density the midtone gain was...

NorthAmericanPrintSurvey-

Interesting survey -

What are the specifications for a printing press? Here's a guide-

Here are some good articles by Felix Brunner-

So here’s a little ‘history’ of color reproduction. In the ‘old days’ we had ‘trade houses’ which produced color separations for the printers. I was one of those - so how did we know how to make the separation’s? We made them all to SWOP - (Specifications for Web Offset Publications) - based on...

. . .a great story-I did some consulting for a company (Branch Smith) in Texas. They won the prestigious Malcolm Baldridge Award - I believe the ONLY printing company to do so. While there I found several issues, a big one was the press was ‘doubling’ in the Magenta Unit - I called and asked...

Here are some GATF specs for the Press-

I’m thinking something in the RiP got corrupted. . . Maybe reset it & re-liberalize. Press ALWAYS gain - seldom sharpen. I have the RiP “wanted” numbers if that helps. Dan 412.889.7643

I have instructions on how to achieve Grey Balance at press. This will work for single, 2-color, & 4-color presses. It's designed for people who can't afford, or don't have the tools necessary, for G7 or other methods. I have density numbers for Coated and Uncoated as well as the "wanted" RIP...

Call me & refresh my memory on the RIP. I remember using the tone scale settings. Dan 412.889.7643

Here's an item I wrote several years ago and the responses. The standard deviation of a press is + or - 2%. That 4% variance in any particular color will show a cast but if you keep the colors in 'balance' the 4% variance becomes only a 'light' or 'dark' variance - this difference we can live...

Sorry, I don't have that Brunner book. Contact me off line I have one that's better!

I have attached several articles by Felix Brunner, they are valuable to anyone trying to understand Color Lithography. You can contact me with any questions 412.889.7643 Dan.

Send me an email and I’ll send you the “wanted” dot area numbers! [email protected]

TRUE but - 2 reasons - #1-I don't trust Creo or Kodak and I want to be sure I'm printing a 1-2-3% dot accurately! #2- When the bean counter up front decided to change plates all I need to do is linearize - curve stays the same! Oh, and by the way, on a previous post you thought on a negative...

Here, try this and let me know how it works! 1-Print this tone scale with linear plates (attached). Use "Deer" poster for density reference Coated & Uncoated! 2-Measure dot area. 3-Enter "Wanted" values into rip (no one ever gives you them) (attached). 4-Print with new adjusted plates. Oh, you...