Search results

I know, why bother. Well, I'm between quoting programs and will eventually purchase something. I don't need or want all the add On's. Just want to do quotes ONLY. In the short term was thinking of quickly creating some XL tables. Maybe x3 or x4 tables for time-based items. (artwork...

I know most will say a toy. See photo. But here is the context- Cheap as chips to purchase Often get request for super small runs (less than x50) Even it only suitable for uncoated stock it could still be worth it. Has anyone out there had experience with a similar machine?. This configuration...

This is doing my head in. I can't get these to not be grayed out. See attached. I have looked at all the obvious things, having said that please state them anyway. I suspect someone has changed a setting on the cutter itself. The feeder seems alight. The arms move ok when I power it on. All...

Hi there. According to Morgana this is an obsolete model. No parts:-( My only hope is finding a second hand one somewhere. If you are in New Zealand or Australia happy to purchase whole machine (at the right price). Not likely but just thought I'd put it out there. Thanks for looking. Simon

Hi there I'm after any one of the following- CE6000-40, CE6000-60 , CE6000-120 Has to be one of these models Good going condition, Reasonable price please. Preferably in Australia or New Zealand. (trying to watch freight cost). thanks Simon

Hi There. I have an old Graphtec CE6000 with the F-mark feeder. Suspected mother board gone. These Graphtec cutters (without the F-Mark sheet Feeder) are relative cheap to purchase. My question is- 1/ Could I transfer my mark feeder to another CE6000? I assume I would need to move the...

Hi there, would like to purchase these, (see photos). Will take any amount. (within reason). Need to be at least 2 years old. (the older the better) There is a problem with more recent batches. (a problem with the glue I believe). Reposting from earlier this year. thanks Simon

Hi there. I have an older model F-mark. CE6000-40 Plus. It has died. Camara still works fine, Cutter works ok. Just not the arms. (the F-mark bit). There is only one agent in this part of the world for these. Got the tech out and he suspects the hub (which seems strange to me as it's so...

Hi there. Can someone flick me the link to look up the year of manufacture from the serial number. (if there is one?). Not getting a lot of response from Morgana. Hoping they might have a site where I can just key in the number. thanks Simon

Hi there. Not hugh $$$ at stake. Having said that who can afford to throw away almost 3k in these tough times. I realize back up support will be nonexistent if something breaks. I get a lot of requests for sort run perfect bound books. Not really economic to farm out for such small volumes...

Hi there, would like to purchase these, (see photos). Will take any amount. (within reason). Need to be at least a 18months old. (the older the better) There is a problem with more recent batches. (a problem with the glue I be leave). thanks Simon

Hi there Finally decided to bite the bullet and purchase one of these. (Been watching the prices gradually coming down over the last few years). Very few used ones come up on the market here. (New Zealand). I'm almost certainty going to have to import. (US no good, different electrical...

Hi there, Duplo Collator. DC-10/60. Screen is not showing all the information it should?. see photo5. If the screen was blank or partially blank, I'd suspect a faulty connection. It's almost like the whole collator needs resetting somehow. Obviously, I have turned off. (I have turned everything...

Hi there. Bit of a puzzle. Works fine on coated stocks (both satin and gloss). Uncoated a different story. Lucky if we get one in three through. (spits them out the reject slot). We have tried different positions, thickness etc. Strangely enough it does seems better if we leave the job...

Hi there. Just scored myself an old DC 646. Being a private purchase pretty up to myself to workout the setup. I'm running flux on my Konica 4070. I'm guessing I can make myself some basic Pdf templates?. (just wanting to do some basic cutting at this stage e.g. x21 business cards, x6 up DLs...

Hi there. Pdf created in Canva. (supplied by customer) Is there a quick way to move these in adobe acrobat? (see attached, this screenshot is not from the actual file). I don't want to open the file in illustrator (for obvious reasons). I could do it in pitstop, keeping in mind I have a very...

Hi there. Just a silly little problem. See attached. I had to pull both the side covers off my old DBM-120. Obviously I have now put back. I have turned on and off. Pull power cord out. I'm guessing there is a mico sensor somewhere? Any thoughts much appreciated. thanks Simon

Hi there. Bit of a strange one. Has anyone out there had any success downgrading their guillotine?. When I say downgrade, I mean still being able to use when the electronics pack up. I'm looking at purchasing another guillotine. It will need to be reasonably old (this is all I can afford)...

Hi there. I've scored myself one of these. (Old I know! but real cheap). I see I can run it from adobe illustrator but just wondering how far back do I have to go? (what version?). Anyone cutting from AI CC ? It looks like I have to run it under Win7,Win8 or Win 10. Shame as I'm more of a Mac...

Hi there. Looking to purchase one on these. (or similar type of machine). Needs to be in good nick and reasonable price. Prefarbly one that has not done a huge amount of work. Maybe a dealer has an ex-demo machine? (In the unlikely event any dealers are reading this). If coming from the states...