Search results

Another problem which started around 6 months ago on our Versant 80 in the UK is the 2nd BTR Roll. They've started using a softer compound on the roller. It started leaving lines on my sheets and when I look closely it looks like fine scratches on the roller. When I queried this with tech...

Thanks, I found that out the hard way but at least I've learnt something from this experience

Thanks for the tip PricelineNegotiator. Problem solved!!!...it was the paper, which seems a bit strange because I've run this job 3 times before without any problems. I was using a 300gsm Inspira Ucoated and decided to try something a bit smoother. It came out perfect straight away. I...

When I feed a long sheet (640mmx320mm) through the bypass Tray 5 on my Xerox Versant 80, the Xerox only allows me to print at a maximum paper weight of 177-220gsm but my sheet weight is 300gsm Uncoated. My problem is, I'm trying to slow the Xerox down by feeding at a slow speed on cast coated...

Since starting my research, I have now moved on from the FB700 which I was looking at, to the new FB9000 with sheet feeder (which we may add on at a later time). I'll send some laminated 400gsm sheets to Intec for testing to see how it fairs because it says that the machine can cut up to 450gsm...

Hi everyone When running solids on an uncoated paper on our Xerox Versant 80 the image still has a shiny finish to it. I'm not expecting to see results as I would get from litho printing but does anyone have any tips on getting as close to a matt look as possible.

How about within an 'action' or 'global change'. I would need to do something similar to 'find and change'. I needed to change a graphic from RGB Black to a particular Pantone within a 100 page document.

Does anyone know if its possible to change the QR Code and barcode (which are both graphics) to black as well as the text.

We would be looking at the FB700 which can produce 2 x SRA3 sheets at a time. This is our first possible entry into die cutting which would allow us to be able to create short runs and prototypes so speed isn't really a problem. Until the time that we have a demo, I wasn't sure if this is...

https://intecprinters.com/products/cutting-creasing/flatbed-cutters/ We're a digital printer and I'm doing some research on the Intec range of digital die cutters. What I like about this machine is the small footprint size and dieless cutter/creaser/perforator...basically all-in-one, which I...

When I need to print a good solid with minimal cracking when folded or something with quality on our Xerox Versant 80, out comes the 'Xerox Colotech + Silk'.

The company who printed the sheets for me were one of the first in the country to get a Versant 2100 and also had this problem. Xerox used theirs as a test machine and any problems they had were logged and new components were made and applied as modifications to all other 2100's, that's why you...

Right...here we go!!!!! Before and After Pics attached (Lines are darker on the actual sheet - the camera didn't show it up clearly). Had an engineer round for 100gsm uncoated creases (it was the fuser) and whilst he was round, I showed him this forum...he did laugh at some of the comments but...

I had a look inside my Versant 80 but wasn't sure which part you was refering to. I have attached a pic of the inside area. Is it the part with a circle around it. If it is, do you know what am I supposed to do to it.

Thanks everyone. I will call out an engineer again and see what they say otherwise I will take this further. When the Engineer told me it was a known fault and that is what the fly wheel was for, I spoke to another engineer to confirm if this was true and he said that it was. Is there any out...

No the line doesn't repeat on the sheet. It is only in 1 position but on every single sheet. As mentioned by 'Wonderings', I had to outsource this job to someone with a 2100. When I mentioned it to him, he also had the same problem but Xerox eventually fixed it but I don't know if this is only...

4 months into using our Versant 80 I noticed a dark vertical line appearing in the tint areas of a job I was running. When an Engineer came round to have a look, I was told that it is one of the faults of the Xerox Versant 80 (see images attached) and that there was no way around the problem. I...

Latest news...Attached are some pictures of the screws which I adjusted. Not sure if they were the correct screws which I was supposed to adjust or not but IT WORKED!!! I've put through about stapled sheets and I had a slight kink on 1 of the sides of the staple I then turned the left screw a...

Thanks. I've already tried moving the clincher out of position and then placing it back again, but still the same problem. I was also looking at taking it apart but the screws are so small that if they drop into the booklet maker, it can be a nightmare looking for them. The positioning of the...

Hi Everyone, Lately I've been having problems with my Duplo DBM-120 booklet maker. Around 3 in every 10 books are not closing properly once stapled through. I've changed staple heads but this doesn't make any difference. Attached is a picture showing the problem. I also have a 2nd Duplo DBM-120...