sidneykidney
Well-known member
4 months into using our Versant 80 I noticed a dark vertical line appearing in the tint areas of a job I was running. When an Engineer came round to have a look, I was told that it is one of the faults of the Xerox Versant 80 (see images attached) and that there was no way around the problem. I never had this on my Xerox 700 and find it strange that this has even been allowed to happened which means I can't run any jobs which contain a tint on the sheet.
Xerox created a fly wheel to minimise the problem but it still doesn't do anything when running heavier stocks.
I printed a CMYK tint test and found that the line is in a different position on each colour.
Does anyone have any workarounds to clear or minimise this problem which is caused when the sheet is fed from the tray and comes to a halt at the 2nd BTR.
Xerox created a fly wheel to minimise the problem but it still doesn't do anything when running heavier stocks.
I printed a CMYK tint test and found that the line is in a different position on each colour.
Does anyone have any workarounds to clear or minimise this problem which is caused when the sheet is fed from the tray and comes to a halt at the 2nd BTR.