Search results

Yes, it's possible. But you have to re-program it with proper software using AvDiag/Unidiag

It''s a Flapper jam. Look inside the drum to see any mechanical problems first.

There is no chance to restore any content of RIP HD without special commands, sent over AGFASet program. It does not matter what type of SW is inside HD - anyway that was neither PC nor MAC base, AGFA RIP Sta 400-600 internal SW was based on the Assembler language for very specific Controller...

Any sort of troubles could appear after a few days on the run. I do not think your issue is fatal and incurable. I wish I could see problem zone with my X20 microscope. Is your exposure part of machine CAPSTAN style?

Plate developed properly but incorrect exposed. Laser problem or combination of a few ones, including media motion. You need serviceman on site for deeper look inside.

You will come back with the same question soon because that was not home sensor problem.

Anywhere... Nobody can tell you where without visiting your site to have a glance on the machine.

Cold welded contact

error 35 - Image Buffer address as data test failure.

It's not encoder problem, forget about spin-motor. You can not replace encoder itself - it needs to be balanced. That's laser switching/transition problem. Check electronics board. I am not Heidelberg trained serviceman, so please don't ask me for help.

Not available anymore since site has been switched to new forum engine Will send you later

And how technicians will survive in such a cruel world? :)

Had never seen that diagram. It's third part production module purchased by Scanwiev

The OCP module, which contains a dedicated micro-controller, is the main controller of the system. NOT JUST DISPLAY WITH TOUCHPAD!!! User commands originating from the RIP and/or the operator are verified, parsed and either acted upon by the OCP or passed to the DEC. So... Brain and spinal chord...

Oh,,, that reminds me kids plaied with sick puppy and complained later - Mum, he is dead... OCP and DEC are in strong logical conjunction to each other. Killing one you could kill another one. The correct way was to purchase another OCP and stop playing dangerous game as you did.

Usually problem comes from the blue plug of keyboard. Silver conductive lines are open very close to the plug and corroded with developer evaporation. Exposed lines have dark color, under the mylar layer they are still silver metallic. Do not forget to protect exposed silver with... nail polish...

As usual, Farshad... Neither feedback, nor thanks for our time and experience.

U9 Blue Sensor is your Cassette presence sensor. This sensor has a potentiometer to adjust its sensitivity.

I have tried to keep that machine in a good shape :D

Wow, I did not know that. The crate price was so high, so KTWeb boss just stopped any attempt to sell their VS.