Search results

what is your pre and post damp setting on the consol

they are okay presses. call Heidelberg about parts. plates are available good for a small shop one or 2 people were you can do something else while it images plates. register is not the best side to side. decent to the gripper

if the Heidelberg plates were the same image and had no moire, Id say you have a screening issue in your rip. If I could afford an anicolor sm52, I might consider just looking into a Heidelberg rip or ctp system. it would appear that they have a superior screening algorithm. or for that...

have you tried those plates on a different press. to rule out the plates. or have someone close make plates on a different type rip from your file and see what happens.

rollers fixed the issue

the biggest difference between a 52 and a 300 is one is a 20 inch press and on is a 29 inch half size

I have a supra setter and use chem free 101 plates. the clean out unit is starting to leave a little residue on the plates down one side. the rollers appear to be spring loaded but is there some adjustment to this pressure. or is it time to get new rollers or just a good scrubbing.

I have to agree with alith7. give me the 45+ everytime. no kids to deal with. they show up to work. down side is affordability, but if we can agree on a wage then perfect. the affordable care act should help out with health care right.

watch for the contacts that connect on impression.

another quick question for a small user. are the cockpit workstations required to be 64 bit now as well. I have one thats not up to speed. also on ppi are we going to have to upgrade to windows 7 64 bit. if so I will have to by a new usb card reader/writer.

i dont know either but I need to change our ks letterpress belt. from my first looks the issue seems to be the brake. I was thinking 2 bolts and it would flop down and out of the way.

we just have the tech come out and install everything, so maybe thats why they are waiting. being 4 hours out is tough on the install guys. i prefer not to be the first to run the software. its always nice to get the first patches installed with the software.

update, looks like its going to be may -june before they get it out to contract users.

take off your side frames and listen. I had screws coming out of some of the solenoids. you may just have to buy some and trial and error, but it sounds like you have a large leak. you should be able to find the problem.

is this through prepress interface. going to meta is different than sending to ppi.

I think a printing equipment supplier should ought be better at communications. thanks for the information.

so its sunday and I am bored. did some windows updates on the servers and cleaned out the suprasetters cou. now searching for info on new versions of ppm, signa and meta. we are running 2011 still and wondered if any one has heard if 2012 is out, or 2013 is coming, or as usual 2012 is...

I think they are only asssembling pm units not sm

did not know they offered the assembled in china version out side of china. all parts are made in germany and shipped to china for assembly

copiers and computers another point all together. I set computers power settings to 4 hours plugged in, and monitors to power save at 1 hour. copiers at 4 hours. I was hard drive spin down was an easy consistant option, but I set those to never as it seems to be more stable for me. we arent...