Search results

i hope someone can help. Why the linearization curve that I assign to my screen set is not manifesting in the screen sets selection in the screening options in the workflow? I am very sure that I created and assign my linerization curve correctly in the ColorPath organizer. Please help. //Lyzan

Thanks, unfortunately touching the top right corner yields no result. No "CALIB". Touching the left top corner, the "SPECIAL" menu is coming out, but there is no "CALIB" there only "Calibrate laser" and 4 other menus related to machine parameters. Beside, the buttons from the SPECIAL menu are...

Go to HP support site. You will find it there.

Thanks for your reply. With digitiser, i mean the touch panel. The new touch panel as I see it is exactly identical with the old one, i.e., model 4PP320.0571-35. The touch screen is not totally unresponsive. The machine is booting perfectly using the old CF card except that the touch buttons in...

chances are you are not using the PS driver. Get that HP CD driver and reinstall your driver.

We changed the power panel of our Polaris XTV because for some unknown reason the digitizer was broken. Prior to the broken digitizer, the digitizer suddenly became unresponsive to touch. Just few days ago, a new power panel was installed. But the same problem exists, that is, digitizer is not...

Did you create your own MX4 in GMG?

Problem solved! Carriage bearings and encoder replaced. _______ Lyzan

Hi dirk, actually I am busy sorting out things about this problem. Service engineers attended us and are now busy for my other problem with Galileo. next in line will be Polaris. Thanks for your worthy advice and recommendations. I'll post development... we just need to fix the Galileo first...

Hi dirk, I'm off for two days, I will surely do your advice. Thanks, Lyzan

Hi Dirk, Still got massive dot loss after 100k copies, especially on black solid tone. I have no idea about doing a fast wobble. I have no test form for checking focus and I do know what is pwm. However, we did some standard test for our press - slurring, registration, etc. negative and...

@Farshad, Thanks again. Yes, I will make the service engineer to check that. Currently, our supplier is waiting for the arrival of the parts they think needed to be replaced. @Kevin, It is a size issue. Since this problem occurred, I am measuring the exposed area plate by plate, page size by...

Hi Dirk, I followed your recommendation. I got almost identical result with your settings and my settings (+ or - 2 at 50% across the plate). I lowered the laser power a little bit at 73 with filter position at 34.1. Yes, I have run length problem as I inquired in my other thread. The service...

Thanks Dirk. Our's is setup as follows (using only 1200) @1200 laser power=41; Filter position 1 = 52; Filter position 2 =30; Filter position 3 = 10 I asked this because in my observation, I can put whatever Filter position value and adjust laser power accordingly base on my exposure test...

@Farshad Thanks. The video cable looks ok, at least the areas that I can touch and see. Around half of it is located into some kind of chain connected to the carriage assembly which I'm afraid to touch. Also, I do not like to touch the Apis cable, I'm afraid because it feels like the dot...

@Farshad I will take note of this. I will mention this to the service engineer. I have limited understanding of the cables connected to carriage assembly, I can only guess which is the video cable and possibly this is the rounded cable that looks like the color of a copper. I will surely...

Hi Dirk, I am using Agfa LAP-V (violet silver). Thanks, Lyzan

@Vlad Thanks for clarifying and explaining directly those things about Galileo VXT. Lyzan

Thanks everyone for your reply. @Farshad That's the first thing I did two weeks ago until I noticed that the misregisration is caused by the expansion of image area. I am using 20-80% prior to this problem and read the Help menu that suggest the method that you mentioned. I have no luck...

@gordo, I have not heard any temperature compensation from the the service engineer for Agfa Galileo VXT. @Armya Image is stretching. For example if I have an imposition of 50 x 70cm (plate size is 1030 x 785mm), the imposition will become 50 x 70.2cm on two plates, then 50 x 70.1 on one...