Search results

Basically you are seeing the effect of double polarization - from the instrument (particularly in M3 which is polarized by definition) and this particular film. Not all film has a polarizing effect so this isn't always a concern. In the eXact the guaranteed way out of this problem is to measure...

reading data again reading data again ColorMaster itself stores all the data as spectral data. If you decide to change the method you should be able to use the stored data in ColorMaster to create a new sample/standard with a new colorimetric setting (D50/2 in this case) if you want to go down...

i1iO flashing red light i1iO flashing red light I couldn't find it in the support articles but it is in the quckstart guide and the glider replacement guide both found here: X-Rite: i1iO lit.

Spectrodensitometer A Spectrodensitometer is distinct from a standard densitometer by nature of it's design. Traditionally densitometers used 3 or 4 filters to obtain a fixed status response (T,E,A etc). Today's evolution of this design are the densitometers that use colored LED's to recreate...

sources for reference files and targets sources for reference files and targets ProfileMaker 5.0.9 includes reference files for the IT8.7/4 as well as the idealliance control bar. Or you could go to the source itself... Idealliance has a hybrid DTP70/iSis target and the appropriate reference...

There is not a simple answer to this question. What is the final goal? Color Profiling? Proof verification? For Profiling the issue may be the particular CM solution you are using as to the smallest most optimum target, which would need input on what kind of printing you are trying to build a...

Re: X-rite densitometer readings to Excel spreadsheets on a Mac Aside from turning auto transmit on you need to set the data type, correct strip definition and other configuration settings in the configuration tab of ToolCrib. Not specific to the DTP41 but there is a minor amount of...