Search results

This may help: Express Label Print

The pages from ISO 12647-2 (pg. 19 & 20). In page 19, which indicated the curve representing which type of paper and plate. Remark (c) stated the definition of curve for CTP plate From pg. 20 of ISO 12647-2, did not found the curve G & H.

Did you try to disconnect the SCSI cable from the RIP computer and startup the Panther alone?

What recorder are using? Panther, Panther Pro or Pro46, etc Most of the time the registration of the PrePRESS recorder was caused by the drive roller. Try to use you finger to press the rollers, if it is become soft, then the possibility is high. There are other causes, but this is the most...

Sound Like you have the PBHD startup problem. The program of the Panther is located in the PBHD 0 You can try to un-plug the SCSI cables and then plug the PBHD-0 SCSI cable to PBHD-1 and download the panther program to your new PBHD-0 (the old PBHD-1). The panther program should be found in the...

We check the conductivity, pH, temp. and IPA content of fountain solution every day. The new fountain solution parameters is; conductivity - around 900us to 1000us, pH - around 5.0 to 5.2, temp. - around 9 to 10 degree C and IPA - 9% to 10% All above are quite stable and within the range...

iterative profiling is a scientific sampling method not only use in getting a better icc or proof. X-Rite use this in colormunki for monitor profiling, in IPEX 2010, X-Rite announced the i1-Profiler will have this in Q4-2010. Xerox also file a patent of their own iterative profiling in 2009 -...

Thanks, would make sure that the blanket would be the same eight as the bear.

Thanks for your information. From your attachment, there is another set of ink roller strip setting:CD 102 5mm 4mm 3mm 3mm. Why there are some many different ink roller setting for a same model. using different setup parameter will cause any problem? Thanks again.

I got a diagram of Heidelberg ink roller setting. The ink strip of the roller #13, 2, 1, 14 should all at 4mm. However, I found that there is an other diagram which stick on the frame of press showing the ink strip of these four ink roller is 2, 3, 4, 4. mm (for ink roller #13, 2, 1 & 14). Which...

Unfortunately, the plate thickness is 0,28mm not 0,30mm. We cannot get 0,30mm plate in here. Thanks.

Would like to ask anyone having the experience of over squeeze of blanket and plate. The press is Heidelberg CD-102, with semi-auto plate feature. The thickness of plate is 0,28mm, using the pack gauge to check that the height higher than the plate cylinder bear is 0,13mm The blanket is...

Thanks for for all gentlemen who reply my thread that make me to resolve my confusion.

Gordon, Thanks for the explanation. Your Blog provide a lot value information. I am confuse again on the dot gain. In above, you mentioned that a tone reproduction curve would be applied to the plate. to achieve 50% tints in file then having 50% tints in press print. ISO-12647-2, which stated...

I would like to ask a silly question on screening. Created a file in AI, the file is a 50% cyan. Send the file to output to CTP. The screen on the CTP plate should be measured as 50% or the others? Let say, the CTP plate having a 50% tint, take this plate to print, the press having a TVI at 16%...

Dear all, Sorry for not responding all the follow up posts. I was out of town for few days. Thanks for all your comments. The followings are information of our current system: 1. Prinergy Workflow 2. Kodak Trendsetter 800 II (Quantum) 3. G & J Plate Processor 4. Measuring device - Hanna pH...

We are using Kodak CTP, the plate output is accurate and not need to make linearization. Printed a IT8/7.4 to build a ICC (attached). For the TVI graph, we found that the C, M, Y curve is not similar to the shape of ISO. The printed copies looks OK. Please help to find out is what is the causes...

Nothing special for GMG Color Server, a device link profile software with a nice GUI only. Similar product: CGS-ORIS Press Matcher, Alwan CMYK Optimizer, followed by Kodak Color Flow.

Got it. Thank you!

Gordon, Please see the attachment. Three different screen ruling were stated.