2 Up Direct to Plate System

[SAP24]

Looking to replace film system with processless direct to plate system. 1 and 2 color work on Ryobi and AB Dick presses. Any experience and suggestions would be appreciated.

 

[ID13]

We bought one of these recently and have been happy with it. It makes paper plates and will make film for when we need to use a metal plate. Only goes up to 120 LPI though.


http://www.mitsubishiimaging.com/thermal-digiplate-system.html

 

[MacDaddy]

We have had AB Dick Dpm 2340 for years. Polyester plates should do a nice job for you. I'm sure there is a newer version. Just set th proper roller pressure to plates. Cheapest way might be direct to metal plate from epson.

 

[marktonk]

Hi SAP24,

We offer the Suprasetter A52 along with our ND 100 processless metal plate. We also offer a poly plate solution. Hit the link below for info on the SuprasetterA52/A75. You can download the brochure from "Download Product Guide" at the bottom of the page. If you have an interest, please let me know, I can have a Heidelberg representative for your area contact you to discuss your production needs and help determine which solution may be a better fit. Good luck.

Mark Tonkovich
Heidelberg USA