Hi All
Ok... Let me paint a Picture
Material Types
Felt Board
Uncoated Board
Coated Matt Silk Paper
Textured Board
Carton Board white
Carton Board Yellow
Carton Board Backed
and many more...hopefully you get the picture
Presses
Heidelberg 102 x 3
XL105 x 1
Prinect Prepress and Printroom Manager for Prepress
Epson
Colour Monitored on Press by Image control Heidelberg on all presses
We proof to Fogra 39 deltaE of 2, this is measured on a regular basis for approval
We calibrate the presses to ISO Standard LAB and dotgains, based on Paper Type 1 (one common material coated and uncoated)
The Problem....
Due to the amount of stocks we use, the paper white and absorbency of the material, we get different results...
Questions
Do you have a calibration for each material (hopefully not) match to ISO for LAB and Dotgain and have a bespoke profile for each material?.....We print with UV Varnish and a yellow Board...UV make the print go yellow. mixed with the yellow paper...its miles out of ISO spec..
Do you just change the paper white on the ICC profile to match the material at proof stage and make a compromise at print stage ?
I find the ISO Spec so Black and white....if only we printed on Normal ISO Material !!!
Any Black and white advice would be welcome.....
Regards
Dan
Ok... Let me paint a Picture
Material Types
Felt Board
Uncoated Board
Coated Matt Silk Paper
Textured Board
Carton Board white
Carton Board Yellow
Carton Board Backed
and many more...hopefully you get the picture
Presses
Heidelberg 102 x 3
XL105 x 1
Prinect Prepress and Printroom Manager for Prepress
Epson
Colour Monitored on Press by Image control Heidelberg on all presses
We proof to Fogra 39 deltaE of 2, this is measured on a regular basis for approval
We calibrate the presses to ISO Standard LAB and dotgains, based on Paper Type 1 (one common material coated and uncoated)
The Problem....
Due to the amount of stocks we use, the paper white and absorbency of the material, we get different results...
Questions
Do you have a calibration for each material (hopefully not) match to ISO for LAB and Dotgain and have a bespoke profile for each material?.....We print with UV Varnish and a yellow Board...UV make the print go yellow. mixed with the yellow paper...its miles out of ISO spec..
Do you just change the paper white on the ICC profile to match the material at proof stage and make a compromise at print stage ?
I find the ISO Spec so Black and white....if only we printed on Normal ISO Material !!!
Any Black and white advice would be welcome.....
Regards
Dan