AB Dick 9970D Press Problems HELP!!

[haabfingers]

I have an AB Dick 9970D. The feeder is constantly activated & the feet go up and down non-stop. The solenoid that triggers the feet to start feeding in the up & down motion is constantly charged and activated. Any ideas as to why this is happening and how would I track down the problem or fix it?? I have to power down press each night because the solenoid is hotter than H*!! by morning due constant charge! Thank you in advance for any help/comments/ideas!

 

[smalloffsetpressexperts]

There is a SSR board on the press with relays and maybe the Feed SSR is fried

 

[haabfingers]

There is a SSR board on the press with relays and maybe the Feed SSR is fried

What is a ssr and what one is it? Cant find it in the box. Thanks

 

[haabfingers]

What is SSR and what board is it ive looked in box dont see or find it thanks

 

[haabfingers]

There is a SSR board on the press with relays and maybe the Feed SSR is fried

Ifound it, switched out number 4 to number 5 all works, THANKS, HAAB

 

[haabfingers]

I found it, I switched #4 & #5 relay so fare all works, I think #4 relay was bad but it seems to be ok in the 5 slot!!
Thanks for info,

 

[smalloffsetpressexperts]

Very nice job and what you did should be fine. There is one SSR on the 70 not used.
Glad you got it going.
SSR is solid state relay and the scr will fry sometimes keeping it closed

 

[haabfingers]

Very nice job and what you did should be fine. There is one SSR on the 70 not used.
Glad you got it going.
SSR is solid state relay and the scr will fry sometimes keeping it closed

Thank You for your help.........