Agfa Avantra 44s OLP Error 82

kamran

New member
I am facing problem with Agfa Avantra 44S OLP "error 82 Unknown bridge error"

anyone have any idea for solve this error

Thanks
 
I am facing problem with Agfa Avantra 44S OLP "error 82 Unknown bridge error"

anyone have any idea for solve this error

Thanks

Wrong or corrupted Firmwares between DEC board and bridge board is one of the cause of error 82 (Unknown Bridge Error). Download the right firmwares on the DEC board as per of the Agfa service manual and firmwares' guideline using UNIDIAG. Using unidiag is a safer way of downloading the firmware compare to Avdiag. Good Luck.
 
Last edited:
Incomparable firmwares between DEC board and bridge board is one of the cause of error 82 (Unknown Bridge Error). Download the right firmwares on the DEC board as per of the Agfa service manual and firmwares' guideline using UNIDIAG. Using unidiag is a safer way of downloading the firmware compare to Avdiag. Good Luck.

Thanks for your reply

I have upload OLP firmwares 34.07.hex after then machine boot fine and work ok but after few hours same error comes again and machine not boot properly
 
   
Back
Top