• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

blotchy bue and green on Versant 2100

wonderings

Well-known member
Have a 11 x 8.5 brochure (2 up, 4/4) I am trying to print on our Versant 2100. Printing on a Lynx 70lb text uncoated 104 gsm long grain sheet 13 x 19. There is a heavy blue and green bar that is coming out blotchy. The blue is far worse. Makeup of the blue is 88C 64M 0Y 0K

I have tried playing with transfer settings for both M and C, run cleaning, tried adjusting the fusing temperatures all with no luck.

Colour drums are all fairly new and 85% life and up. Anyone have any thoughts on what I can do here to get a smooth solid blue and green?

43514952801_45a7a27613_b.jpg


Thanks
 
Hi Wonderings,
We had similar issues and found it was due to moisture content of paper. Try a freshly opened pack and see the difference.
 
Usually this can be corrected with a 2nd bias transfer voltage adjustment. Sorry it has been a little time since I was around one and forget how to get to the setting to adjust.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top