CTP System Chemical Free

[printnpress]

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Thanks

 

[Raymond Ramirez]

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Thanks

Screen 4100 or 4300 if looking for used. Small plate kit. If not mastercut rototrim to cut the plate after imaging.

 

[Raymond Ramirez]

Screen 4100 or 4300 if looking for used. Small plate kit. If not mastercut rototrim to cut the plate after imaging.

I have them both in stock

 

[SteveSuffRIT]

Just make a plate on laser printer, no chemicals.

 

[Magnus59]

En/Press - Xanté

The En/Press offers users an affordable way to go digital and meet the demand for fast, full-color printing.

www.xante.com

 

[in01]

Contact Jeff at Platesetters- 201-410-3537

 

[Jhoy]

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Thanks

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Thanks

I might suggest looking at Plate Writer 2000.

 

[Jhoy]

I might suggest looking at Plate Writer 2000.

 

[Fredbarnes]

You can try this xante platemaker 5.
I found it on Google don't know it personally

 

[Cher]

Hello,

Looking for advise on the best CTP platemaker (chemical free) to use for small offset shop with low volume offset. We have a Ryobi 3302 2 color. We were currently using a ABDick DPM 34 HSC and we are finding it to be quite costly with chemicals and plate material. Any suggestion would be greatly appreciated.

Thanks

Hi, how are you ?
Do you still use processless CTP plate? My company has been producing CTP plates over 28years. More information: [email protected]