cazksprint
Member
Hello,
Been quite a while since I posted here. Not sure if this is the right category to post this question - maybe it should be in "prepress". Moderator, please move this question if you think it's appropriate!
Currently we use an old roll-fed poly platemaker. It works well, but only as long as we dump-and-change chemistry every five weeks or so. That process takes several hours and kills production time, but it's necessary to get good clean plates. So, we are considering replacing the machine we currently have with something more modern and reliable.
What computer-to-plate platemaking machine is considered to be the well-respected, known-to-be reliable choice? We run black poly plates on small 12 x 17 Multis and ABDicks with the pink glycol-based fountain solutions, so the choice of machine needs to be geared toward that type of plate.
Critera include reliablility, ease of operation and quality of customer support. Cost is important too, but less important than reliability in the long run.
Been quite a while since I posted here. Not sure if this is the right category to post this question - maybe it should be in "prepress". Moderator, please move this question if you think it's appropriate!
Currently we use an old roll-fed poly platemaker. It works well, but only as long as we dump-and-change chemistry every five weeks or so. That process takes several hours and kills production time, but it's necessary to get good clean plates. So, we are considering replacing the machine we currently have with something more modern and reliable.
What computer-to-plate platemaking machine is considered to be the well-respected, known-to-be reliable choice? We run black poly plates on small 12 x 17 Multis and ABDicks with the pink glycol-based fountain solutions, so the choice of machine needs to be geared toward that type of plate.
Critera include reliablility, ease of operation and quality of customer support. Cost is important too, but less important than reliability in the long run.
Last edited:
