Dolev 800V Error

[osmond]

Hi everyone,

I'm getting an error on the Dolev 800V - DAT POS 5V ERR

And everytime I go to the Utilities(F6) - the monitor shuts off or blinking, on and off.

Thank you very much in advance

 

[leo]

You should check Static optic and CRI board.

 

[leo]

And kindly check the OMC/ HOMC

 

[kala]

Just plug out all the board and clean it reinsert all the board will solve this problem (sometime- not all the time)

 

[osmond]

Thanks. already did clean the boards. Will check on the Static Opti and CRI.

Leo, do you have dol800 parts? I need a cable - Data Output Cable - that will connect, VLSI board to Dolev8 cpu. Message my in me email, [email protected]. Thanks

 

[carlossc_73]

send me an email i can help you
the error you have are two diferent errors,
one is your video card or floppy disk and the other is because you have disconected your databox from the standard controller

 

[osmond]

@ carlos - its a video card issue - replaced and all is ok...