Duplo DF-1200 Help Please!

[jdodoubleg]

I've got a Duplo DF-1200 that mostly does tri-folds. I've got a problem where every other sheet is folded wrong. This is a new issue as of about 2 weeks ago. We checked our front to back registration and it is almost dead on now. We use a duplo 618 to cut. We check those and adjust accordingly - so the sheets match each other as they are cut. Once it hits the folder all bets are off. We have cleaned the rollers and the sensors. Don't know what else to do. Could it be that the settings are bouncing around while it is folding? Thanks for any help you can provide.

 

[DYP]

Have you taken air and blown it out? Sounds like the gates might hanging up a little.

 

[Shawnd]

Sounds like a timing issue which would be more than likely a sensor, have you checked to make sure all the sensors are screwed down tight?

 

[jdodoubleg]

I will take a look at the sensors and blow out the gates. Hopefully one of those is a fix.