Duplo DF-1200 Help Please!

jdodoubleg

Well-known member
I've got a Duplo DF-1200 that mostly does tri-folds. I've got a problem where every other sheet is folded wrong. This is a new issue as of about 2 weeks ago. We checked our front to back registration and it is almost dead on now. We use a duplo 618 to cut. We check those and adjust accordingly - so the sheets match each other as they are cut. Once it hits the folder all bets are off. We have cleaned the rollers and the sensors. Don't know what else to do. Could it be that the settings are bouncing around while it is folding? Thanks for any help you can provide.
 
Have you taken air and blown it out? Sounds like the gates might hanging up a little.
 
Sounds like a timing issue which would be more than likely a sensor, have you checked to make sure all the sensors are screwed down tight?
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top