Yuvaraju.V.
Member
The attachment contains the observed values when I tested two fount samples. Can any one judge and tell which is the best suitable between this two.
I have simply chosen Sample 1 because at just 1.5% of addition it attains the required base level p.H 4.6 and it gives less conductivity when compared.
The logic behind is: For good operation of printing press the dampening solution should be maintained at 4.8 to 5.2 and should have less conductivity.
I have simply chosen Sample 1 because at just 1.5% of addition it attains the required base level p.H 4.6 and it gives less conductivity when compared.
The logic behind is: For good operation of printing press the dampening solution should be maintained at 4.8 to 5.2 and should have less conductivity.