Film save/optimization in agfa avantra 44

[FaustoMariani]

HELLO.
I'm looking how optimize film on Avantra 44 with Taipan PDF RIP.
Example: 3 Differnt BW JOB are sended in different time and we would like to have all on the same film exposure.
Is posssible?

 

[dlzzl]

Taipan PDF RIP not do it,it is can optimize film in as same Job

do u know EagleRIP Rip of Founder,it can do it and very easy...

I have EagleRIP if u interested

 

[VladCanada]

For B/W jobs << Across job ganging>> should work

 

[dlzzl]

For B/W jobs << Across job ganging>> should work

Hi,sir,I think Across job ganging only same job..

 

[VladCanada]

Hi dlzzl, thanks for ur e-mail concerning USB HQ RIP interface...

Citating from PSE User Manual:
Note: If you enable the ‘Across Job Ganging’ option, ganging will be applied
to all jobs entering the RIP.

 

[WiseGuy]

Ganging

Ganging

I think you're looking for optimization that relates to ganging jobs, but in case this is helpful, you may want to check out Dynagram's inpO2 Optimization Module for optimization of ganged flat work on the same press sheet. There is a video that demonstrates this on the web site in the inpO2 section. Dynagram - DYNAGRAM imposition software for print professionals

I hope this is helpful!

 

[dlzzl]

Hi dlzzl, thanks for ur e-mail concerning USB HQ RIP interface...

Citating from PSE User Manual:
Note: If you enable the ‘Across Job Ganging’ option, ganging will be applied
to all jobs entering the RIP.

Hi,Sir:

Now I looking for 3PCS Chip for Agfa avantra Operator Control Panel,The board Loacted U2,U9,U13

do u know,can u help me

tks u

 

[FaustoMariani]

Thanks. Job Ganging have solved my problem

 

[GeraldSA]

Please forgive the intrusion here by a hardware specialist. We had some problems in the past with Taipan and cross job ganging. Problem was that the AVA44 feed and cut timeout must be set to "0". i.e. only manual feed and cut needs to be applied.
Gerald.