Heidelbrg topsetter

[ct copier service]

Hello

New to these so Im really ignorant
machine showing an e7155 can enter service mode by guessing
but the main display is in Japanese or Chinese

how do I get it to display English?

and what can o do to correct or further diagnose the E7155
I believe that's a tail clamp error no documentation so I'm guessing best I can

Thanks

Brian

 

[chevalier]

Acquire the manuals for a screen PTR. The Topsetter is just a rebadge.

 

[ct copier service]

Acquire the manuals for a screen PTR. The Topsetter is just a rebadge.

Where can I get them?


Thanks

Brian

 

[Gramann]

To change the language back to English:

Press "Offline" - lower left button
Press "User Maintenance" - fifth button from top
Press "OK" - bottom center
Press "ETC" - 8th button counting left to right, top to bottom
Press "OK" - bottom center
Press "Language" - fourth button from top
Press "OK" - bottom center
Press "English" - top button
Press "OK" - bottom center
Press "yes" - left button, middle of screen
Press "OK" - bottom center

Machine should be in English now.
If the machine woke up speaking Japanese, you will be in for a long day unless you have a disc with the machine data on it and know how to restore this data.

The E7155 message is that the Tail Clamps are missing during initialization.

 

[ct copier service]

tail clamps

tail clamps

got the machine to go back to English thanks

Now at a 7155
Where are the tail clamps located on the drum?
I see 6 clamps labeled LA422 etc and when I try to park the drum I see the sensors light up
Any documentation would be great

thanks
Brian

 

[akalaray]

Where are you located - I know a great engineer!