Help me, Screen PTR4300 and PT8100 Plate

[siriussg]

Hi, sorry for my bad english.

I have 2 CTP's,
SCREEN PTR-4300S whit FUJI Brillia LH-PJ
and PTR-8100, whit unknown Plate

I need the tables for configuration another plates. AGFA and FUJI.

Thanks Very much. my email is [email protected]

 

[evve]

Try to find colibration tables in the AGFA's and FUJI's web sites.

Best regards

 

[siriussg]

Try to find colibration tables in the AGFA's and FUJI's web sites.

Best regards

My friend I try to find in the website of fuji´s and Agfa´s calibration tables, but i dont find the info.

 

[KimSaks]

There are no "Stock Calibration Tables" that I know of.
Usually, a technician needs to calibrate the device for the new plates because each device is different in power, zoom and focus.
Where are you located? I may be able to help find a qualified technician to do a plate set-up for you in your area.
Also, have you checked with your plate source to see if they offer such a service?
You can write me directly if you wish.
[email protected]

 

[has-been]

Once you have set the power level coorectly, simply image calibration scale (.5% to 99.5%) and adjust your calibrations.

Has-been

 

[siriussg]

Thaks Very Much, ready, working perfect.

 

[has-been]

siriussg
One word of caution - I only ever found one densitometer that "actually" worked on plates and gave consistent results.

Has-been