how to stick 2 14pt card back to back

[bigben]

I have a special request that need to stick 2 14pt paper back to back. One paper is white and the other one is yellow. The customer want to see the little yellow line on the side of the card. How should I do this?

Thank you.

 

[M@CK]

Potdevin gluer is the best and cheapest way if you ask me, Daige also makes adhesive systems similar to that.
Other way include Dry Mounting or applying some kind of double sided film with a laminator but that gets expensive quick.

 

[davidspiel]

I have a special request that need to stick 2 14pt paper back to back. One paper is white and the other one is yellow. The customer want to see the little yellow line on the side of the card. How should I do this?

Thank you.

Even better than a Potdevin:

The ODM Spreader is an 18" (46 cm) top side cold adhesive gluer. It is the first step in making a case. The thickness of the adhesive is easily adjusted with the scraper blade. The machine eliminates the need for the operator to "flip over" the glued cover material as with traditional bottom side gluers. $5,335

Case Binding Equipment, Case Binders, ODM Casemaking Machine

David Spiel
[email protected]

 

[davarino]

I have a special request that need to stick 2 14pt paper back to back. One paper is white and the other one is yellow. The customer want to see the little yellow line on the side of the card. How should I do this?

You may wish to look at the "multiloft" materials available from Convertible Solutions. From your description, I imagine you would simply trim a printed white sheet slightly smaller than the yellow sheet, collate, and cut.