I'm switching over to the HP 5000, poly plates. I use the AB Dick 360 press.
I sure could use any information you could provide for How-To go about the prosess
of making the poly plate - I've been told the plate must be put through a laminate machine,
before going to press. I cannot locate a booklet on instructions. Toll free 800-356-8754.
Bill Reichard. HELP!
I sure could use any information you could provide for How-To go about the prosess
of making the poly plate - I've been told the plate must be put through a laminate machine,
before going to press. I cannot locate a booklet on instructions. Toll free 800-356-8754.
Bill Reichard. HELP!