lotem 400 error

[OSS]

Please find enclosed error details for your information

Left side tail end corner getting thin lines appearing in image area and also in non image areas.
The drum getting vibrate on completion of 83% expose , it vibrates unusually and getting normal during completion of the expose while breaking.

We have thoroughly tested and cleaned the drum and carriage movement and cleaned all the grips spring .

There is no error message coming during this time.

Any suggestions ?

 

[PACH]

It could be that the plate is not attached correctly at that area of the tail gripper. Also clean the vacuum holes and check suction. the vibration could be due to the weights on the side of the drum are not in the correct position.do a New plate from the Loading system screen.

Please find enclosed error details for your information

Left side tail end corner getting thin lines appearing in image area and also in non image areas.
The drum getting vibrate on completion of 83% expose , it vibrates unusually and getting normal during completion of the expose while breaking.

We have thoroughly tested and cleaned the drum and carriage movement and cleaned all the grips spring .

There is no error message coming during this time.

Any suggestions ?