Lotem 400 expose problem TSP

[connerj91]

I need a little help as Kodak doesn't service this machine anymore.

I have a lotem 400v.

Last week a new problem developed. During exposing the system aborts the process anywhere between 30% and 75%. I've reset the TSP board and the system entirely. Only 2 good plates out of the last 10. The message in the production manager says aborted by host Error Number 11. When I look at the logs I see the following error messages.

"Error N:7155 occurred. TSP Internal Error.\nNo valid data in output FIFO."
"Error N:7125 occurred. TSP HW Error(tsp_lb_int_error_e).\nTSP Line buffer error interrupt received."
"Error N:5230 occurred. No room in buffers timeout. TSP is waiting for plotter with full buffer. (check if plotter is ready for expose)."

​Any ideas?

 

[OSS]

Most probably your universal tsp otherwise tsp cable is the problem

 

[connerj91]

Thanks, I reseated the TSP board and connecting cable and the problem seems to have been resolved.

 

[printmomo]

The communication issue could be a sign of future problems. If it happens more often you might need a new TSP card. For any service on your lotem400 you can reach me anytime at 513-312-7154
I specialize on all lotems.
Thank you