Mitsubishi Console Upgrade from Comrac to IPC II

[Nutech Shroff]

Hello,
We have a Mitsubishi Printing machine and have a Comrac Console and want to upgrade it to the newer IPC II console - can anyone guide me if this can be done.

Also are there any third party solutions for online connectivity and closed loops systems.

 

[Retroman]

Dear Sir
I believe the best option at this time would be to contact LithoTel Software. They have a system that will allow older Mitsubishi presses to accept online CIP/3 files and utilize X-Rite or Techkon scanners for closed loop color control.
The system has been applied to well over 100 Mitsubishi presses worldwide.
Check out their website at <www.lithotel.ca>.

 

[Nutech Shroff]

We have other machines with IPC consoles so would like to stick to a solution from Mitsubishi if they offer one.

 

[IchibanDenkiban]

Hi
Yes you can upgrade to IPCII but you need the cpu ROM chips from Mitsubishi agency I have done this many time to new presses.

 

[Nutech Shroff]

Hello,
Can you tell me an approximate cost to upgrade the console?

 

[bhavin]

Did you find the solution? I also want to upgrade my mitsubishi IPCII console. If you find pls. let me know.

Thanks

 

[abhijeet kolhatkar]

If you can send me the Machine details like Model. Sr. No of press, year of manufacturing and Machine configuration, your location. Definitely we can offer a original solution.

 

[bhavin]

+91 98202 68088

 

[shroffrakshit]

Hello,
Is this option still available? I was unable to access the link specified by you

 

[h.etemadi]

Hi
Yes you can upgrade to IPCII but you need the cpu ROM chips from Mitsubishi agency I have done this many time to new presses.

Hi I have a Diamond 3000R-8 Mitsubishi printing machine. Something happened for CPU-B board and we had to repair it but after repairing all the settings and parameters were lost and unfortunately we do not have any back up of them. So I need the right settings and parameters like positions and gear ratio for this machine. Can you help me?

 

[h.etemadi]

Hi I have a Diamond 3000R-8 Mitsubishi printing machine. Something happened for CPU-B board and we had to repair it but after repairing all the settings and parameters were lost and unfortunately we do not have any back up of them. So I need the right settings and parameters like positions and gear ratio for this machine. Can you help me?

Dear Sir
I believe the best option at this time would be to contact LithoTel Software. They have a system that will allow older Mitsubishi presses to accept online CIP/3 files and utilize X-Rite or Techkon scanners for closed loop color control.
The system has been applied to well over 100 Mitsubishi presses worldwide.
Check out their website at <www.lithotel.ca>.

Hi I have a Diamond 3000R-8 Mitsubishi printing machine. Something happened for CPU-B board and we had to repair it but after repairing all the settings and parameters were lost and unfortunately we do not have any back up of them. So I need the right settings and parameters like positions and gear ratio for this machine. Can you help me?