Polar Mohr 137 EMC-MON cutter information

MGL13

New member
I am looking to find any kind of info on this model of cutter. We recently received it from another branch of our company that shut down and all they gave us was the operation instructions. They also cut a large number of wires through the machine before they sent it to use. We have been able to fix the wire but now we do not have any control power throughout the machine. the main motor comes on and we have power going into the main transformer board but we have nothing coming out. If any one has access to a service manual for it or has any info on this model that would be great.
 

Attachments

  • IMG_5572.jpeg
    IMG_5572.jpeg
    734.3 KB · Views: 283
Look for a green button next to the main Switch, That brings in the lower voltage to run backguage and cut buttons
 
Hi sir:

Have all tech documentations for POLAR 115 EMC- MON, and any other models, that you need, installation, troubleshooting, service repair manual, training manual, Hydraulic training, etc.

Blessing
[email protected]
Mobile+WhatsApp:+505 8861 1441
Managua, Nicaragua. C.A.


Attachments​

 

Attachments

  • POLAR 2 DOC NUEVO.PDF
    13.4 KB · Views: 269

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top