dundi Member Feb 7, 2019 #1 We have a Polar/Mohr 137EMC Cutter that is not cutting accurately. When set at 5" it cuts at slightly less (approx 4.97") and when set at 50" it is considerably over. Closer to 50.125". Anyone else run into this issue?
We have a Polar/Mohr 137EMC Cutter that is not cutting accurately. When set at 5" it cuts at slightly less (approx 4.97") and when set at 50" it is considerably over. Closer to 50.125". Anyone else run into this issue?
