We have a 40" Komori 640P that has the duct from the delivery running approximately 30' on a horizontal run to a 1 hp fan mounted on an outside wall.
We have a fair amount of powder showing up on the outside of the building below the vent which is about 15 feet high. Is this a satisfactory way to vent a delivery or would we be better served going straight up through the roof?
The duct on the Baldwin dryer does go straight up.
We have a fair amount of powder showing up on the outside of the building below the vent which is about 15 feet high. Is this a satisfactory way to vent a delivery or would we be better served going straight up through the roof?
The duct on the Baldwin dryer does go straight up.