Ricoh ProC901 - SC Codes

[echidna]

Does anyone have a list of Error codes for this machine?

I just got one yesterday, and from what I have been told its one of the first, if not THE first in Canada, and unfortunately as a result both myself and our onsite tech is still new at this machine. Of course if it were during the week, it would be no problem to get answers, unfortunately though the weekend is a different story.

Specifically I have an SC 552 code and have no idea what the solution would be

Any help would be greatly appreciated.

 

[Cagey Veteran]

SC552 is a pressure roller warm-up error. Did the machine jam? Was all the paper found?
There may be a sheet stuck in the fuser. This code can only be released in service mode, but if there is still paper in there you will need to get it out first. (Which may involve disassembly of the fuser.)

 

[echidna]

Thanks! That looks like it solved our problems!

 

[lozano]

Does anyone have a list of Error codes for this machine?
Any help would be greatly appreciated.

A general ricoh error code list is available here
Ricoh Error Codes