RipIt Imagesetter problem

[HenrySchwab]

I have an Imagesetter 300L that was recently acquired from a retired business owner. Upon setting the machine up, noticed a roller was cooked (melted). Purchased another roller, installed it, and now have an issue with the knife. I keep getting the message "knife not home". I replaced the board that controls when the knife is home and it still won't work. Somebody please please help me ASAP!!

 

[realaqu]

I have an Imagesetter 300L that was recently acquired from a retired business owner. Upon setting the machine up, noticed a roller was cooked (melted). Purchased another roller, installed it, and now have an issue with the knife. I keep getting the message "knife not home". I replaced the board that controls when the knife is home and it still won't work. Somebody please please help me ASAP!!

I guess, when knife at the home position, you should find two wires connect to a switch at that position, the switch might be malfunction or out of adjustment

 

[PricelineNegotiator]

If you are willing to spend money, you can call Erick at Pressman's Pride. He is very knowledgeable but if you didn't buy the machine through him I would imagine he would charge you to look into it.