roland 700 delivery pile sensor problem

[JOHNYPRINT]

Hi all
I'm asking for some more answers for my poor old roland. Occasionally the delivery sensor will double activate and whenever it does this it cuts the feeder out. it does this for a while then it's ok for a day or so. tried all the obvious stuff ,cleaning adjusting etc.any suggestions.
regards johnyprint
PS. HAPPY NEW YEAR TO YOU ALL

 

[Alois Senefelder]

!!!!!!!!!

!!!!!!!!!

Hello JohnyPRINT,

Just stop "FFFFFFFFFFF ing around - fit a new £50 --- Proximity Sensor !!!!!!!! OR take one off a Press that works and try on yours

Regards, Alois

 

[JOHNYPRINT]

roland sensor

roland sensor

HI ALIOS SENEFELDER
Thanks for your abrupt reply, we have "FFFFFFFFFFFFFFFFFECKING DONE THAT".
Try constructing your answers in a more respctful manner, If you cant do that try drinking less or leave the "FFFFFFFFFFFFECKING FORUM"
loving regards and a happy new year, johnyprint

 

[akiyama_king]

HI ALIOS SENEFELDER
Thanks for your abrupt reply, we have "FFFFFFFFFFFFFFFFFECKING DONE THAT".
Try constructing your answers in a more respctful manner, If you cant do that try drinking less or leave the "FFFFFFFFFFFFECKING FORUM"
loving regards and a happy new year, johnyprint

Johny, when it does that and clears the feeder i assume it throws an error at the console? what does the error say?

 

[JOHNYPRINT]

I will double check on monday when i get back to work
regards johnyprint

 

[Alois Senefelder]

Oh dear !!!!!!!!

Oh dear !!!!!!!!

Oh dear ! I've ruffled some one's dignity! A grand start to the New Year ---------


Johnyprint --- I would do the "Obvious" - upset some one in Polestar's Maintenance Team



Regards, ALOIS

 

[akiyama_king]

Oh dear ! I've ruffled some one's dignity! A grand start to the New Year ---------


Johnyprint --- I would do the "Obvious" - upset some one in Polestar's Maintenance Team



Regards, ALOIS

Just out of intest Alois, do you work for polestar?

 

[Alois Senefelder]

Akiyama

Akiyama

Hello Akiyama, I'm retired, but in the late 1960's worked for a company that went onto form part of the "British Printing Corporation" now the "Polestar Group"


Regards, Alois

 

[jbeniston]

replace it with new one.
Make sure you order the right one!
If you stillhave problems get an electrician in to find out whats going on

 

[JOHNYPRINT]

Thanks jbeniston
We think we have resolved the issue, there were some switches on the continuous pile change device wich were sending the wrong signal(covered in grease and spray powder) so we will monitor the situation from now on.The proximity swith has been chaged.
regards johnyprint

 

[jbeniston]

Thanks for the feed back, pleased to hear you sorted it.