Screen 4300 (2003year) Error E5109 "Trail clamp cannot be locked PH24-1/2 or M24 is i

[mrozin]

Screen 4300 (2003year) Error E5109 "Trail clamp cannot be locked PH24-1/2 or M24 is i

Hello dear friends,

Error E5109 "Trail clamp cannot be locked PH24-1/2 or M24 is illegal"
Do you have any Ideas?
Thank you very much

 

[Albert]

May need to be replaced? They don't last.

 

[Gramann]

It could be something as easy as the set screws on the M24 gear are loose, causing the tail clamp lock to not move.

 

[mrozin]

May need to be replaced? They don't last.

All OK. The M24 motor has a gear. This gear was unfixed. I've just used my screw-driver and nothing else.
Thank you!

 

[mrozin]

You were right! thank you

 

[Armya Inc]

It could be something as easy as the set screws on the M24 gear are loose, causing the tail clamp lock to not move.

Did you align the motor? There is no need for alignment if the machine is working error free.

 

[mrozin]

Did you align the motor? There is no need for alignment if the machine is working error free.

No errors. Working fine. I know about alignment procedure, but i didn't do it myself. I think i will have a chance to do it in future.