selectset 5000 media jam 06

[Haberprinter]

Have a Selectset 5000. Cannot load film and film was not advancing between ripping files but would advance the length of the file before it quit advancing at all. All three boards checked out. motor to the roller that advances the film checks out. Checked for slivers of film for actual jam and path seems clear. In the past I did have problems with the film not wanting to load but would eventually load.
Does anyone have an answer?

Thanks

 

[DonBlock]

Harperprinter

If your positive the boards are all good, it is most likely the input jam sensor. I have this available if you would like to contact me directly.