Shinohara 66vp Problem

[TPS]

We are having a problem with our shino 66vp. When we turn on our press we get and alarm light on our ftu441a board and the press will not go any faster than a crawl when you hit the button to speed it up it just stops. At first this was an intermittent problem and only happened sometimes and the light would go off in 30 to 60 min. but know it is taking hours so we have been leaving the press on for now. We believe this is the board malfunctioning so we will be getting a new one ($5000) but I'm just worried if this is not our problem? Was wondering if any of you had input or have dealt with this.

Thank you in advance,
JR

 

[Dean Graphic Services]

The problem is the The ftu 441a board, this controls the main motor. $ 5000.00 is a little high for this board. Contact me if wish and we may have one in stock for a better price.

 

[TPS]

Thanks for the reply, we sent it out to get refurbished for around $1000. So far seems to be working alright. But if you could email me some contact info and what type of parts you carry, I will be sure to check with you for future orders. email: [email protected]

Thanks
JR