Techorans cut out

Paperboy

Member
Hi everyone I run a 5 col sm52 cpc and in the mornings on start up the techno rand cuts out at random moments any ideas ?
 

chock

Well-known member
Please identify why type of Technotran do you have ? if you take some PIC from ID from
the plate of Technotran for help you, in the troubleshooting

Let me know, sincerely

Blessing

superchock@yandex.com

Mobile+WhatsApp:+505 8861 1441
 

chock

Well-known member
Hi sir:

The 1 steps: is test the Power supply Low voltage undervoltage 24V, cause can be control voltage too low 19V, Check the power supply vs the schematic diagrams from your TechnoTran HydroSTAR Compact Alpha.d.
and Repair.


2) Look for loose connection, corroded, or broken lines, or connector dirty, or faulty, clean very well and fix it.

Blessing

superchock@yandex.com
Mobile+WhatsApp:+505 8861 1441
 

Paperboy

Member
Thanks for reply I will look into this Monday - this problem causes the press to freeze - also when all up and running somtimes I have to re boot because the duct roller will not spin ? Yesterday I came in and could move the tray in the feeder up or down ?
 

Automatically Autonomous Automation

Automatically Autonomous Automation
Although the autonomous car is not quite ready, a lights out print operation is something you can do right now if you have a comprehensive Print MIS (Management Information System). The advantages can put money on your bottom line. So what’s your next step? Link to Article

   
Top